Home
»
Decoflair
»
Ceiling
»
DIY Ceiling Moldings
»
D8-INTERNAL-CORNERS DECOFLAIR Ceiling molding HD polystyrene 50 x 50 x 190 - 1 piece

D8-INTERNAL-CORNERS DECOFLAIR Ceiling molding HD polystyrene 50 x 50 x 190 - 1 piece

D8-INTERNAL-CORNERS DECOFLAIR Ceiling molding HD polystyrene 50 x 50 x 190 - 1 piece

D7-INTERNAL-CORNERS DECOFLAIR Ceiling molding HD polystyrene 40 x 45 x 2000 - 1 piece

D1 DECOFLAIR Polystyrene ceiling molding 21 x 21 x 2000 - 2 pieces

Install the D8 molding is a breeze with this 19cm pre-cut inside corner. Save time by gluing the ready-made 90° corner and simply add 2 meter lengths, leaving a 3mm gap for the glue joint. Then touch up the miter joints with glue, let it dry, and apply the finishing paint. The classic D8 molding is timeless and ensures a seamless transition between wall and ceiling, hiding cracks and small imperfections.

Quantity	Discount	You Save
10	5%	CHF4.95
20	7%	CHF13.86
50	10%	CHF49.50

D8 DECOFLAIR Polystyrene ceiling molding 50 x...

CHF11.65 (tax incl.)

D8-ROOMKIT DECOFLAIR Polystyrene ceiling...

CHF84.00 (tax incl.)

Decoflair CM500 - Colle - 235 x 50 x 50 mm - 1 pièce

CM500 DECOFLAIR Glue 235 x 48 x 68 - 1 piece

CHF5.95 (tax incl.)

Description

Glue :

The quantity of glue required for installation is easy to define using the Noël & Marquet glue consumption calculator (https://bit.ly/3P61U0x) or the Decoflair glue consumption calculator (https://bit.ly/44PTEI8). It will allow you to know the number of putty glue cartridges required for installation.

Painting :

Polystyrene products should only be painted with solvent-free acrylic paint.

Polyurethane products can be painted with any type of paint (it is nevertheless advisable to carry out a test beforehand).

Installation :

The accessories necessary for successful professional quality installation are:

Mastic glue allows you to glue your moldings, create assembly joints and correct small imperfections,
The special cutting box for moldings and cornices allows you to create perfect angles whatever the molding profile,
The special fine-toothed polystyrene saw allows you to make precise, flawless cuts on this material,
The special HD polystyrene and polyurethane saw with medium teeth allows you to make precise and flawless cuts on these materials.
Additional installation accessories such as: cartridge gun, spatula, sponge.

Manufacturer :

The NMC company is the European leader in manufacturers of decorative polystyrene and polyurethane moldings. All Noël & Marquet and Decoflair products meet the requirements of European quality standards.